Maxim MAX8757ETI+

网络电源控制器4.5V ~ 26V25 µA

Overview

The MAX8716/MAX8717/MAX8756/MAX8757ETI+ are dual, step-down, interleaved, fixed-frequency, switch-mode power-supply (SMPS) controllers with synchronous rectification. The MAX8716/MAX8717/MAX8756/MAX8757ETI+ are intended for main (5V/3.3V) power generation, while the MAX8756 is optimized for I/O power rails in battery-powered systems. Fixed-frequency operation with optimal interleaving minimizes input ripple current from the lowest input voltages up to the 26V maximum input. Optimal 40/60 interleaving allows the input voltage to go down to 8.3V before duty-cycle overlap occurs in 5V/3.3V applications, compared to 180° out-of-phase regulators where the duty-cycle overlap occurs when the input drops below 10V. Accurate output current limit is achieved using a sense resistor. Alternatively, power dissipation can be reduced using lossless inductor current sensing. Independent ON/OFF controls and power-good signals allow flexible power sequencing. Soft-start reduces inrush current, while soft-stop gradually ramps the output voltage down preventing negative voltage dips. A low-noise mode maintains high light-load efficiency while keeping the switching frequency out of the audible range. The MAX8716 is available in a 24-pin thin QFN package, and the MAX8717/MAX8756/MAX8757ETI+ are available in a 28-pin thin QFN package.

Features

Bulk Package
Network Power Controller Applications
4.5V ~ 26V Voltage - Input
25 µA Current - Supply
Surface Mount Mounting Type