Maxim MAX6866UK29D3S+T

简单复位/加电复位2.925V1

Overview

The MAX6866UK29D3S DAC-controlled boost/inverter IC converts a positive input voltage to a positive or negative LCD bias voltage up to +27.5V or -27.5V. The device features an internal N-channel MOSFET switch, programmable current limiting, and an internal 6-bit digital-to-analog converter (DAC) for digital adjustment of the output voltage. It comes in a small 16-pin QSOP package (same size as an 8-pin SO). The MAX6866UK29D3S uses a current-limited, pulse-frequency-modulation (PFM) control scheme to provide high efficiency over a wide range of load conditions. Its high switching frequency (up to 300kHz) allows the use of small external components. An LCDON output allows the LCD bias voltage to be automatically disabled when the display logic voltage is removed, protecting the display. The MAX6866UK29D3S has a +2.7V to +5.5V input voltage range for the IC, and a +0.8V to +27.5V input voltage range for the inductor. Typical quiescent supply current is 65μA. Shutdown current is 1.5μA. The MAX6866UK29D3S offers high-level integration to save space, reduce power consumption, and increase battery life, making it an excellent choice for battery-powered portable equipment. The MAX629 is similar to the MAX686, except that it does not contain a built-in DAC. Both devices have evaluation kits to facilitate designs.

Features

Tape & Reel (TR) Package
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current

1 Number of Voltages Monitored

Applications

There are a lot of Maxim Integrated
MAX6866UK29D3S+T Voltage Supervisors applications.

• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors