Maxim MAX6654MEE+T

数字，本地/远程-55°C ~ 125°C-64°C ~ 125°CI²C/SMBus3V ~ 5.5V10 b±1.3°C（±5°C）

Overview

The MAX6654MEE is a precise digital thermometer that reports the temperature of both a remote P-N junction and its own die. The remote junction can be a diode-connected transistor—typically a low-cost, easily mounted 2N3904 NPN type or 2N3906 PNP type—that replaces conventional thermistors or thermocouples. Remote accuracy is ±1°C for multiple transistor manufacturers, with no calibration needed. The remote junction can also be a common-collector PNP, such as a substrate PNP of a microprocessor (μP). The 2-wire serial interface accepts standard System Management Bus (SMBus), Write Byte, Read Byte, Send Byte, and Receive Byte commands to program the alarm thresholds and to read temperature data. Measurements can be done automatically and autonomously, with the conversion rate programmed by the user, or programmed to operate in a single-shot mode. The adjustable conversion rate allows the user to optimize supply current and temperature update rate to match system needs. When the conversion rate is faster than 1Hz, the conversion results are available as a 7-bit-plus-sign byte with a 1°C LSB. When the conversion rate is 1Hz or slower, the MAX6654MEE enters the extended mode. In this mode, 3 additional bits of temperature data are available in the extended resolution register, providing 10-bit-plus-sign resolution with a 0.125°C LSB. Singleshot conversions also have 0.125°C per LSB resolution when the conversion rate is 1Hz or slower. A parasitic resistance cancellation (PRC) mode can also be invoked for conversion rates of 1Hz or slower by setting bit 4 of the configuration register to 1. In PRC mode, the effect of series resistance on the leads of the external diode is canceled. The 11-bit conversion in PRC mode is performed in <500ms and is disabled for conversion rates faster than 1Hz. The one-shot conversion is also 11 bits in < 500ms. The MAX6654MEE default low-temperature measurement limit is 0°C. This can be extended to -64°C by setting bit 5 of the configuration register to 1. The MAX6654MEE is available in a small, 16-pin QSOP surface-mount package.

Features

I²C/SMBus Output Type
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Tape & Reel (TR) Package
Operating Temperature: -55°C~125°C
Supply Voltage: 3V~5.5V
16 Pins
Local Sensing Temperature: -55°C~125°C
16 Terminations
Highest (Lowest) Accuracy: ±1.3°C (±5°C)
Sensor Type: Digital, Local/Remote

Surface Mount Mounting Type

Applications

There are a lot of Maxim Integrated
MAX6654MEE+T Analog & Digital Sensors applications.

• Energy saving at office (air-conditining/ighting control)
• Digital signage
• Automatic doors/elevators
• Industrial
• HVAC
• Disk Drives
• Automotive
• Portable Medical Instruments
• Computers
• Battery Management