Maxim MAX5956AEEE+

热交换控制器，监控器2自动重试

Overview

The discharged filter capacitors of the circuit card provide low impedance to the live backplane. High inrush currents from the backplane to the circuit card can burn up connectors and components, or momentarily collapse the backplane power supply leading to a system reset. The MAX5955 and MAX5956AEEE hot-swap controllers prevent such problems by gradually ramping up the output voltage and regulating the current to a preset limit when the board is plugged in, allowing the system to stabilize safely. After the startup cycle is completed, two on-chip comparators provide VariableSpeed/BiLevel protection against short-circuit and overcurrent faults, as well as immunity against system noise and load transients. In the event of a fault condition, the load is disconnected. The MAX5955B and MAX5956B must be unlatched after a fault, and the MAX5955A and MAX5956A automatically restart after a fault.

The MAX5955 and MAX5956AEEE are available in a space-saving 16-pin QSOP package.

Features

VariableSpeed/BiLevel™ Series
The terminal position of 16
Features of Auto Retry
Programmable features of Circuit Breaker, Current Limit, Fault Timeout
VariableSpeed/BiLevel™ series

Surface Mount Mounting Type

Applications

There are a lot of Maxim Integrated
MAX5956AEEE+ hot swap controllers applications.

• Telecommunications
• Industrial
• Datacom
• Electric vehicle
• Avionics systems
• Safe board insertion and extraction
• Industrial computers and servers
• Redundant-array-of-independent-disk (RAID) storage
• Other forms of communications infrastructure
• Board or blade insertion into live backplanes