Maxim MAX5947AESA+

热插拔控制器1闭锁故障，发热限制

Overview

The MAX5949A/MAX5949B are hot-swap controllers that allow a circuit card to be safely hot plugged into a live backplane. The MAX5949A/MAX5949B operate from -20V to -80V and are well-suited for -48V power systems. These devices are pin and function compatible with the LT4250 and pin compatible with the LT1640. The MAX5949A/MAX5949B provide a controlled turn-on to circuit cards preventing glitches on the power-supply rail and damage to board connectors and components. The MAX5949A/MAX5949B provide undervoltage, overvoltage, and overcurrent protection. These devices ensure the input voltage is stable and within tolerance before applying power to the load. Both the MAX5949A and MAX5949B protect a system against overcurrent and short-circuit conditions by turning off the external MOSFET in the event of a fault condition. The MAX5949A/MAX5949B also provide protection against input voltage steps. During an input voltage step, the MAX5949A/MAX5949B limit the current drawn by the load to a safe level without turning off power to the load. Both devices feature an open-drain power-good status output (PWRGD-bar for the MAX5949A or PWRGD for the MAX5949B) that can be used to enable downstream converters. The MAX5949A/MAX5949B are available in an 8-pin SO package. Both devices are specified for the extended -40°C to +85°C temperature range.

Features

Tube Package
The terminal position of 8
Features of Latched Fault, Thermal Limit
Programmable features of Current Limit, Fault Timeout, OVP, UVLO
Output voltage of 2.5V

Surface Mount Mounting Type

Applications

There are a lot of Maxim Integrated
MAX5947AESA+ hot swap controllers applications.

• Telecommunications
• Industrial
• Datacom
• Electric vehicle
• Avionics systems
• Safe board insertion and extraction
• Industrial computers and servers
• Redundant-array-of-independent-disk (RAID) storage
• Other forms of communications infrastructure
• Board or blade insertion into live backplanes