Maxim MAX5915EUI+

Overview

The MAX5915/MAX5915A/MAX5916/MAX5916A dual PCI 2.2 hot-swap controllers allow for safe insertion and removal of two PCI cards into live PCI slots or backplanes by limiting the inrush current at startup. After startup, these devices provide protection against short-circuit, overcurrent, and undervoltage conditions.

♦ PCI 2.2 Compliant♦ Independent Power Controls for +3.3V, +5V, ±12V, and +3.3V Auxiliary Supplies of Two PCI Cards♦ Internal MOSFET Switches for ±12V and +3.3V Auxiliary Outputs♦ Separate ON/OFF Control Input for Each Channel♦ Independent +3.3V Auxiliary Output ON/OFF Control♦ Overcurrent Foldback with Timeout and Shutdown Protection for ±12V and +3.3V Auxiliary Rails with Status Report♦ Brick Wall with Timeout and Shutdown Protection for +5V and +3.3V Rails with Status Report♦ Output Undervoltage Monitoring for +3.3V, +5V, +12V, and +3.3V Auxiliary Rails with Status Report♦ +3.3V Auxiliary Autorestart♦ Intelligent Selective Thermal Shutdown Control Shuts Down Only the Channel with an Overcurrent Fault♦ 28-Pin TSSOP Package

Features

The terminal position of 28

Bulk Package

Applications

There are a lot of Maxim Integrated
MAX5915EUI+ hot swap controllers applications.

• Network switches
• Networking
• Telecommunications
• Industrial
• Datacom
• Electric vehicle
• Avionics systems
• Safe board insertion and extraction
• Industrial computers and servers
• Redundant-array-of-independent-disk (RAID) storage