联系我们
中文
MAX3535ECWI

Maxim MAX3535ECWI

收发器RS422,RS4851Mbps

比较
MAX3535ECWI
RS-485/RS-422 TRANSCVR
paypalvisamastercarddiscover
upsdhlsf
比较

¥47.70

价格更新:一个月前

博斯克质量保证

912ob9001 201514001 201545001 201813485 2016esdduns
产品详情

Overview

The MAX3535E/MXL1535E isolated RS-485/RS-422 full-duplex transceivers provide 2500VRMS of galvanic isolation between the RS-485/RS-422 side and the processor or control logic side. These devices allow fast, 1000kbps communication across an isolation barrier when the common-mode voltages (i.e., the ground potentials) on either side of the barrier are subject to large differences. Isolation is achieved through integrated high-voltage capacitors. The MAX3535E/MXL1535E also feature a 420kHz transformer driver that allows power transfer to the RS-485 side using an external transformer. The MAX3535E/MXL1535E include one differential driver, one receiver, and internal circuitry to send the RS-485 signals and control signals across the isolation barrier (including the isolation capacitors). The MAX3535E/MXL1535E RS-485 receivers are 1/8 unit load, allowing up to 256 devices on the same bus. The MAX3535E/MXL1535E feature true fail-safe circuitry. The driver outputs and the receiver inputs are protected from ±15kV electrostatic discharge (ESD) on the interface side, as specified in the Human Body Model (HBM). The MAX3535E/MXL1535E feature driver slew-rate select that minimizes electromagnetic interference (EMI) and reduces reflections. The driver outputs are short-circuit and overvoltage protected. Other features are hot-swap capability and isolation-barrier fault detection. The MAX3535ECWI operates with a single +3V to +5.5V power supply. The improved secondary supply range of the MAX3535ECWI allows the use of step-down transformers for +5V operation, resulting in considerable power savings. The MXL1535E operates with a single +4.5V to +5.5V power supply. The MXL1535E is a function-/pin-compatible improvement of the LTC1535. The MAX3535E/MXL1535E are available over the commercial 0°C to +70°C and extended -40°C to +85°C temperature ranges.

Features

Bulk Package
Tube package
28 pin count
28 pins
3.35V power supply

30 mV Receiver Hysteresis

Applications


There are a lot of Maxim Integrated
MAX3535ECWI+ Drivers/Receivers/Transceivers applications.

  • Remote controls
  • Wireless network systems
  • Satellite communications networks
  • Ethernet circuitry
  • Wired telephone
  • Cordless telephone
  • Desktop PC
  • Notebook
  • Pocket PC
  • Desktop radio
产品属性
全选
包装: 散装
部件状态: 在售
类型: 收发器
协议: RS422,RS485
驱动器/接收器数: 1/1
双工: 完全版
数据速率: 1Mbps
电源电压: 3V ~ 5.5V, 3.13V ~ 7.5V
工作温度: 0°C ~ 70°C(TA)
安装类型: 表面贴装型
封装/外壳: 28-SOIC(0.295",7.50mm 宽),16 引线
供应商器件封装: 28-SOIC
接收器滞后: 30 mV

Analog Devices Inc./Maxim Integrated

Analog Devices Inc. (ADI) 是全球领先的高性能模拟半导体公司,专注于模拟、混合信号和电源管理技术。Maxim Integrated 是其子公司,专注于设计和制造模拟和混合信号集成电路。两家公司在2021年完成了合并。

实时新闻

博斯克数字

收入: 85M

2022年的收入为8500万美元,与2021年增长63%。

国家: 105

博斯克服务全球105个国家的客户。

配件发货: 25M+

我们在过去的五年中发货了2.5亿个配件,比前五年增长148%。

制造商: 950

2022年,博斯克从近950个制造商售卖了配件。

所有产品零件号 0 - Z