Maxim MAX3158EAI+

收发器RS422，RS485250kbps

Overview

The MAX3158EAI is a high CMRR RS-485/RS-422 data-communications interface providing ±60V isolation in a hybrid microcircuit. A single +5V supply on the logic side powers both sides of the interface, with external 100V capacitors transferring power from the logic side to the isolated side. Each MAX3158EAI contains one transmitter and one receiver and is guaranteed to operate at data rates up to 250kbps. Drivers are short-circuit current limited and protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high-impedance state. The receiver input has a fail-safe feature that guarantees a logic-high receiver output if the inputs are open, shorted, or connected to a terminated transmission line with all drivers disabled. The MAX3158EAI typically draws 25mA of supply current when unloaded or when fully loaded with the driver disabled. Supply current drops to 25μA when the device is placed in shutdown mode. The device is pin selectable between half- and full-duplex mode and also features an independently programmable receiver and transmitter output phase through separate pins. The MAX3158EAI is a low-cost replacement for opto-isolated transceivers. For fully isolated RS-485/RS-422 transceivers, refer to the MAX1480 family data sheet.

Features

Tube Package
28 pin count
28 pins
5V power supply

25 mV Receiver Hysteresis

Applications

There are a lot of Maxim Integrated
MAX3158EAI+ Drivers/Receivers/Transceivers applications.

• Cordless telephone
• Desktop PC
• Notebook
• Pocket PC
• Desktop radio
• Clock radio
• Tuner
• Portable radio
• Car radio
• Satellite radio receiver