Maxim MAX3059ASA+T

收发器CANbus1Mbps

Overview

The MAX3058/MAX3059ASA interface between the controller area network (CAN) protocol controller and the physical wires of the bus lines in a CAN. They are primarily intended for printer and telecom backplane applications requiring data rates up to 1Mbps. These devices provide differential transmit capability to the bus and differential receive capability to the CAN controller. The MAX3058 output common-mode range is from -7V to +12V. The MAX3059ASA output common-mode range is from 0V to VCC. The MAX3059ASA contains an internal switch termination resistor that makes it ideal for JetLink applications. The MAX3058 features four different modes of operation: high speed, slope control, standby, and shutdown. The MAX3059ASA features three different modes of operation: high speed, slope control, and shutdown. High-speed mode allows data rates up to 1Mbps. In slope-control mode, the slew rate may be optimized for data rates up to 500kbps, so the effects of EMI are reduced, and unshielded twisted or parallel cable can be used. In standby mode, the transmitters are shut off and the receivers are put into low-current mode. In shutdown mode, the transmitter and receiver are switched off. The MAX3058/MAX3059ASA are available in an 8-pin SO package and are specified over the -40°C to +125°C temperature range.

Features

Tape & Reel (TR) Package
Tape & Reel (TR) package
8 pin count
8 pins
5V power supply

100 mV Receiver Hysteresis

Applications

There are a lot of Maxim Integrated
MAX3059ASA+T Drivers/Receivers/Transceivers applications.

• Cordless telephone
• Desktop PC
• Notebook
• Pocket PC
• Desktop radio
• Clock radio
• Tuner
• Portable radio
• Car radio
• Satellite radio receiver