Maxim MAX2615EVKIT#

放大器40MHz ~ 4GHzMAX2615

Overview

The MAX260/MAX261/MAX262 CMOS dual second-order universal switched-capacitor active filters allow microprocessor control of precise filter functions. No external components are required for a variety of bandpass, lowpass, highpass, notch, and allpass configurations. Each device contains two second-order filter sections that place center frequency, Q, and filter operating mode under programmed control. An input clock, along with a 6-bit f0 program input, determine the filter's center or corner frequency without affecting other filter parameters. The filter Q is also programmed independently. Separate clock inputs for each filter section operate with either a crystal, RC network, or external clock generator. The MAX260 has offset and DC specifications superior to the MAX2615EVKIT and MAX262 and a center frequency (f0) range of 7.5kHz. The MAX2615EVKIT handles center frequencies to 57kHz, while the MAX262 extends the center frequency range to 140kHz by employing lower clock-to-f0 ratios. All devices are available in 24-pin DIP and small outline packages in commercial, extended, and military temperature ranges.

Features

Box Package
Amplifier Type

Board(s) Supplied Contents

Applications

There are a lot of Maxim Integrated
MAX2615EVKIT# RF Boards applications.

• Microprocessor
• Radio Transceiver
• Embedded Processor
• Networking Software
• Forming a Self-Healing
• Mesh Network
• MCU
• Transceiver
• Modem
• MAC