Maxim MAX17480GTL+

处理器5mA4.5V ~ 5.5V

Overview

The MAX1748/MAX8726 triple-output DC-DC converters in a low-profile TSSOP package provide the regulated voltages required by active-matrix, thin-film transistor (TFT) liquid-crystal displays (LCDs). One high-power DC-DC converter and two low-power charge pumps convert the +3.3V to +5V input supply voltage into three independent output voltages. The primary 1MHz DC-DC converter generates a boosted output voltage (VMAIN) up to 13V using ultra-small inductors and ceramic capacitors. The low-power BiCMOS control circuitry and the low on-resistance (0.35Ω) of the integrated power MOSFET allows efficiency up to 93%. The dual charge pumps independently regulate one positive output (VPOS) and one negative output (VNEG). These low-power outputs use external diode and capacitor stages (as many stages as required) to regulate output voltages up to +40V and down to -40V. A proprietary regulation algorithm minimizes output ripple, as well as capacitor sizes for both charge pumps. For both the MAX17480GTL+ and MAX8726, the supply sequence is VMAIN first, VNEG next, and finally VPOS. The MAX17480GTL+ soft-starts each supply as soon as the previous supply finishes. The MAX8726 adds a delay between the startups of VMAIN and VNEG and also between VNEG and VPOS. The MAX1748/MAX8726 are available in the ultra-thin TSSOP package (1.1mm max height).

Features

Tube Package
Mainly used in Processor applications
Operating temperature: -40°C~105°C
ANALOG CIRCUIT analog IC

Surface Mount Mounting Type

Applications

There are a lot of Maxim Integrated
MAX17480GTL+Power Management applications.

• Portable Media Players
• Portable Systems
• Hand-Held Systems
• Space satellite point of load supply
• Communications payload
• Optical imaging payload
• Desktop PC
• Motherboard
• Standard notebook PC
• Chromebook