Maxim MAX13325GUI/V+

线路驱动器汽车音频，前置放大器，专业音频2I²C4.5V ~ 18V

Overview

The MAX13325/MAX13326 dual audio line drivers provide a reliable differential interface between automotive audio components. The devices feature differential inputs and outputs, integrated output diagnostics, and are controlled using an I2C interface or operate in stand-alone mode. The outputs can deliver up to 4VRMS into 100Ω loads. The MAX13325GUI/V+ buffers analog audio signals for transmission over long cable distances with a fixed gain of 12dB, whereas the MAX13326 provides a 0dB fixed gain. The diagnostics on the outputs report conditions on a per channel basis, including short to GND, short to battery, overcurrent, overtemperature, and excessive offset. The output amplifiers can drive capacitive loads up to 4nF to ground and 3nF differentially. The outputs are protected according to IEC 61000-4-2 ±8kV Contact Discharge, and ±15kV Air Gap. The MAX13325/MAX13326 are specified from -40°C to +105°C and are available in a 28-pin TSSOP package with an exposed pad.

Features

Tube Package
With 28-TSSOP (0.173, 4.40mm Width) Exposed Pad channels
operate temperature at the range of -40°C~105°C TA
Supply voltage at 14.4V volts

Surface Mount Mounting Type

Applications

There are a lot of Maxim Integrated
MAX13325GUI/V+ Audio Special Purpose applications.

• Consumer electronics
• AV/DVD Receiver, AV Amplifier
• Car or Mobile Audio System
• Digital Television
• Musical Instruments
• Recording Systems
• High-End Audio/Sound Card for PC
• Replacement of DIR1703
• Other Applications Requiring S/PDIF Receiver
• Audio Differential Line Drivers