Maxim MAX13036ATI+

汽车级SPI 串行6V ~ 26V表面贴装型

Overview

The MAX13036ATI+ contact monitor and level shifter monitors and debounces eight remote mechanical switches and asserts an interrupt (active-low INT) if a switch changes state. The state of each switch is sampled through an SPI interface by reading the status register and any switch can be prohibited from asserting an interrupt by writing to the command register. Four of the switch inputs are intended for ground-connected switches (IN0–IN3), and the other four inputs (IN4–IN7), are programmable in groups of two for either ground-connected or battery-connected switches. Two switch inputs (IN0, IN1) have direct level-shifted outputs (DO0, DO1) to be used for PWM or other timing-based signals. Switch input thresholds are set to 50% of the voltage applied to BATREF. The threshold hysteresis is set by connecting an external resistor from HYST to ground. The MAX13036ATI+ supplies an adjustable wetting current to each closed switch to clean mechanical switch contacts that are exposed to adverse conditions. The MAX13036ATI+ operates with a +6V to +26V battery voltage applied to BAT. A separate +2.7V to +5.5V logic supply input (VL) sets the interface voltage. The MAX13036ATI+ is available in a 5mm x 5mm 28-pin TQFN package and operates over the -40°C to +125°C temperature range.

Features

Tube Package
It is based on MAX13036.
Set the part at 3.3V volts

Surface Mount Mounting Type

Applications

There are a lot of Maxim Integrated
MAX13036ATI+ Specialized Interface ICs applications.

• Medical/Industrial
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems