Maxim DS28E40ATB/VY+

验证芯片10-WFDFN 裸露焊盘

Overview

The DS28E01-100 combines 1024 bits of EEPROM with challenge-and-response authentication security implemented with the ISO/IEC 10118-3 Secure Hash Algorithm (SHA-1). The 1024-bit EEPROM array is configured as four pages of 256 bits with a 64-bit scratch pad to perform write operations. All memory pages can be write protected, and one page can be put in EPROM-emulation mode, where bits can only be changed from a 1 to a 0 state. Each DS28E01-100 has its own guaranteed unique 64-bit ROM registration number that is factory lasered into the chip. The DS28E01-100 communicates over the single-contact 1-Wire®bus. The communication follows the standard 1-Wire protocol with the registration number acting as the node address in the case of a multidevice 1-Wire network.

♦1024 Bits of EEPROM Memory Partitioned Into Four Pages of 256 Bits ♦On-Chip 512-Bit SHA-1 Engine to Compute 160-Bit Message Authentication Codes (MACs) and to Generate Secrets ♦Write Access Requires Knowledge of the Secret and the Capability of Computing and Transmittinga 160-Bit MAC as Authorization ♦User-Programmable Page Write Protection for Page 0, Page 3, or All Four Pages Together ♦User-Programmable OTP EPROM Emulation Modefor Page 1 (“Write to 0”) ♦Communicates to Host with a Single Digital Signal at 15.3kbps or 90.9kbps Using 1-Wire Protocol ♦Switchpoint Hysteresis and Filtering to Optimize Performance in the Presence of Noise ♦Reads and Writes Over 2.8V to 5.25V Voltage Range from -40°C to +85°C ♦6-Lead TSOC and TDFN or 2-Lead TO-92 and SFN Packages

Features

Tray Package
Authentication Chip Type
Surface Mount, Wettable Flank Mounting Type