Maxim DS1077U-100+

振荡器，固定频率（双路）12.2kHz ~ 100MHz4.75V ~ 5.25V-40°C ~ 85°C8-TSSOP，8-MSOP（0.118"，3.00mm 宽）表面贴装型

Overview

The DS1077U-100 is a dual-output, programmable, fixed-frequency oscillator requiring no external components for operation. The DS1077U-100 can be used as a processor-controlled frequency synthesizer or as a standalone oscillator. The two synchronous output operating frequencies are user-adjustable in submultiples of the master frequency through the use of two on-chip programmable prescalers and a divider. The specific output frequencies chosen are stored in NV (EEPROM) memory. The DS1077U-100 defaults to these values upon power-up. The DS1077U-100 features a 2-wire serial interface that allows in-circuit on-the-fly programming of the programmable prescalers (P0 & P1) and divider (N) with the desired values being stored in NV (EEPROM) memory. Design changes can be accommodated in-circuit on-the-fly by simply programming different values into the device (or reprogramming previously programmed devices). Alternatively, for fixed frequency applications, previously programmed devices can be used and no connection to the serial interface is required. Pre-programmed devices can be ordered in customer-requested frequencies. The DS1077U-100 is available in 8-pin SO or μSOP packages, allowing the generation of a clock signal easily, economically, and using minimal board area. Chip-scale packaging is also available on request.

Features

EconOscillator™ Series
Operate frequency at 12.2kHz~100MHz
Package / Case: Tube
Mounting Type:Surface Mount
Current - Supply：50mA

4.75V ~ 5.25V Voltage - Supply

Applications

There are a lot of Maxim Integrated
DS1077U-100+ Programmable Timers & Oscillators applications.

• Thermostats
• Consumer Electronics
• Remote Sensors
• White Goods
• Electric Vehicles
• Always On Systems
• Clutch Actuator circuit
• Car Door Handle circuit
• Smart Key
• Remote current sensor