LT LTC1042CN8#PBF

窗口TTL

Overview

The LTC1042CN8 is a monolithic CMOS window comparator manufactured using Linear Technology’s enhanced LTCMOS™ silicon gate process. Two high impedance voltage inputs, CENTER and WIDTH/2, define the middle and width of the comparison window. Whenever the input voltage, VIN, is inside the window the WITHIN WINDOW output is high. The ABOVE WINDOW output is high whenever VIN is above the window. By interchanging VIN and CENTER, the ABOVE WINDOW output becomes BELOW WINDOW and is high if VIN is below the window.

Another benefit of the sampling techniques used to design the LTC1042CN8 is the extremely low power consumption. When the device is strobed, it internally turns on the power to the comparators, samples the inputs, stores the outputs in CMOS latches and then turns off power to the comparators. This all happens in about 80µs. Average power can be made small, almost arbitrarily, by lowering the strobe rate. The device can be self-strobed using an external RC network or strobed externally by driving the OSC pin with a CMOS gate.

Features

LTCMOS™ Series
TTL output capability
Employing 1 elements
Quiescent Current: 3mA

Through Hole Mounting Type

Applications

There are a lot of Analog Devices, Inc.
LTC1042CN8#PBF linear comparators applications.

• Battery management and protection
• Current and voltage sensing
• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices
• Mobile Phones and Tablets
• Battery-Powered Electronics