LT LT1510-5CGN#PBF

多化学1.5A0°C ~ 70°C（TA）

Overview

With switching frequency as high as 500kHz, The LT1510-5CGN current mode PWM battery charger is the smallest, simplest, most efficient solution to fast-charge modern rechargeable batteries including lithium-ion (Li-Ion), nickel-metal-hydride (NiMH) and nickel-cadmium (NiCd) that require constant-current and/or constant-voltage charging. The internal switch is capable of delivering 1.5A DC current (2A peak current). The 0.1Ω onboard current sense resistor makes the charging current programming very simple. One resistor (or a programming current from a DAC) is required to set the full charging current (1.5A) to within 5% accuracy. The LT1510-5CGN with 0.5% reference voltage accuracy meets the critical constant-voltage charging requirement for lithium cells.

The LT1510-5CGN can charge batteries ranging from 2V to 20V. Ground sensing of current is not required and the battery’s negative terminal can be tied directly to ground. A saturating switch running at 200kHz (500kHz for LT1510-5) gives high charging efficiency and small inductor size. A blocking diode is not required between the chip and the battery because the chip goes into sleep mode and drains only 3µA when the wall adaptor is unplugged. Soft start and shutdown features are also provided. The LT1510-5CGN is available in a 16-pin fused lead power SO package with a thermal resistance of 50°C/W, an 8-pin SO and a 16-pin PDIP.

Features

Over Voltage Fault Protection
Available in SSOP Package
with 16 Pins

Surface Mount Mounting Type

Applications

There are a lot of Analog Devices, Inc.
LT1510-5CGN#PBF Battery Management ICs applications.

• Grid power infrastructure
• Cell phone towers
• A/C power substations
• Internet infrastructure equipment
• Aviation ground support systems
• Tower communications
• Weather stations
• Distributed energy resources
• Solar and wind-generating plants
• Electric street sweepers