Intersil ISL9204IRZ-T

锂离子/聚合物350mA-40°C ~ 85°C（TA）

Overview

The ISL9204IRZ-T is a cost-effective, fully integrated high input voltage single-cell Li-ion battery charger. This charger performs the CC/CV charge function required by Li-ion batteries. The charger accepts an input voltage up to 28V but is disabled when the input voltage exceeds the OVP threshold, minimum 10V, to prevent excessive power dissipation. The 28V rating eliminates the overvoltage protection circuit required in a low input voltage charger. The charge current and the end-of-charge (EOC) current are programmable with external resistors. When the battery voltage is lower than a typical value of 2.8V, the charger preconditions the battery with typically 17% of the programmed charge current. When the charge current reduces to the programmable EOC current level during the CV charge phase, an EOC indication is provided by the CHG pin, which is an open-drain output. An internal thermal foldback function protects the charger from any thermal failure. Two indication pins (PPR and CHG) allow simple interface to a microprocessor or LEDs. When no adapter is attached or when disabled, the charger draws less than 1µA leakage current from the battery.

Features

Lithium Ion/Polymer Battery Chemistry
Available in DFN Package
with 8 Pins
operate supply voltage at the range of 5V

Surface Mount Mounting Type

Applications

There are a lot of Intersil (Renesas Electronics America)
ISL9204IRZ-T Battery Management ICs applications.

• Trucks
• Non-road type vehicles
• Golf carts
• Electric-powered machinery
• Fork lifts
• Grid power infrastructure
• Cell phone towers
• A/C power substations
• Internet infrastructure equipment
• Aviation ground support systems