Intersil ISL8088IRZ

降压降压2.75V5.5V800mA

Overview

The ISL8088IRZ is a high efficiency, dual synchronous step-down DC/DC regulator that can deliver up to 800mA continuous output current per channel. The supply voltage range of 2.75V to 5.5V allows the use of a single Li+ cell, three NiMH cells or a regulated 5V input. The current mode control architecture enables very low duty cycle operation at high frequency with fast transient response and excellent loop stability. The ISL8088IRZ operates at 2.25MHz switching frequency allowing the use of small, low cost inductors and capacitors. Each channel is optimized for generating an output voltage as low as 0.6V. The ISL8088IRZ has a user configurable mode of operation-forced PWM mode and PFM/PWM mode. The forced PWM mode operation reduces noise and RF interference while the PFM mode operation provides high efficiency by reducing switching losses at light loads. In PFM mode of operation, both channels draw a total quiescent current of only 30µA hence enabling high light load efficiency in order to maximize battery life. The ISL8088IRZ offers a 1ms Power-Good (PG) to monitor both output at power-up. When shutdown, ISL8088IRZ discharges the outputs capacitor. Other features include internal digital soft-start, enable for power sequence, overcurrent protection, and thermal shutdown. The ISL8088IRZ is offered in a 3mmx3mm 10 Ld DFN package with 1mm maximum height. The complete converter occupies less than 1.8cm2 area.

Features

Tube Package
2 outputs
Peak reflow temperature (Cel) of 260
10 pins
Operating supply voltage of 5.5V
ALSO HAS PFM CONTROL TECHNIQUE

Surface Mount Mounting Type

Applications

There are a lot of Intersil (Renesas Electronics America)
ISL8088IRZ Voltage Regulators applications.

• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment
• Injection molding machinery
• Various CNC machine tools