Intersil ISL8024IRTAJZ

降压降压2.7V5.5V4A

Overview

The ISL8023, ISL8024IRTAJZ are highly efficient, monolithic, synchronous step-down DC/DC converters that can deliver 3A (ISL8023) or 4A (ISL8024) of continuous output current from a 2.7V to 5.5V input supply. The devices use current mode control architecture to deliver very low duty cycle operation at high frequency with fast transient response and excellent loop stability.The ISL8023 and ISL8024IRTAJZ integrate a very low On-resistance P-Channel (45mΩ) high side FET and N-Channel (19mΩ) low side FET to maximize efficiency and minimize external component count. The 100% duty-cycle operation allows less than 200mV dropout voltage at 4A output current. The operation frequency of the pulse-width modulator (PWM) is adjustable from 500kHz to 4MHz. The default switching frequency of 1MHz is set by connecting the FS pin high, which allows for the use of small external components.The ISL8023, ISL8024IRTAJZ can be configured for discontinuous or forced continuous operation at light load. Forced continuous operation reduces noise and RF interference while discontinuous mode provides higher efficiency by reducing switching losses at light loads.Fault protection is provided by internal hiccup mode current limiting during short circuit and overcurrent conditions. Other protection, such as overvoltage and over-temperature are also integrated into the device. A power-good output voltage monitor indicates when the output is in regulation. The ISL8023, ISL8024IRTAJZ offer a 1ms Power-Good (PG) timer at power-up. When in shutdown, ISL8023, ISL8024IRTAJZ discharges the output capacitor through an internal soft-stop switch. Other features include internal fixed or adjustable soft-start and internal/external compensation.The ISL8023 and ISL8024IRTAJZ are offered in a space saving 16 Ld 3x3 Pb-free QFN package with an exposed pad for improved thermal performance and 1mm maximum height. The complete converter occupies less than 0.22 in2 area. Various fixed output voltages are available upon request. See the “Ordering Information” on page 4 for more details.

Features

Tube Package
1 outputs
Peak reflow temperature (Cel) of 260
16 pins
Operating supply voltage of 5.5V
PFM CONTROL MODE ALSO POSSIBLE

Surface Mount Mounting Type

Applications

There are a lot of Intersil (Renesas Electronics America)
ISL8024IRTAJZ Voltage Regulators applications.

• Ball screw pair
• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots