IDT ZSC31050FEG1-T

传感器信号调节器 - 电阻式I²C，SPI，ZACwire™2.7V ~ 5.5V表面贴装型

Overview

The ZSC31050FEG1-R is a CMOS integrated circuit for amplification and sensor-specific correction of bridge sensor signals. The device provides digital compensation of sensor offset, sensitivity, temperature drift and non-linearity by a 16-bit RISC microcontroller running a correction algorithm. The ZSC31050FEG1-R accommodates virtually any resistive bridge sensor (e.g., piezo-resistive and steel-membrane-based pressure sensors). In addition, the device can interface to a separate temperature sensor. The bi-directional digital interfaces (I2C, SPI, ZACwire™) can be used for a simple PC-controlled calibration procedure, encompassing writing and programming a set of calibration coefficients into an on-chip EEPROM. The ZSC31050FEG1-R has been designed for industrial, medical and consumer applications and is specifically suited for most pressure sensors. It can also be used with force, torque, acceleration, angle, position and revolution sensors.

Features

I²C, SPI, ZACwire™ Interface
Mounting Type: Surface Mount
Supply Voltage: 2.7V ~ 5.5V
16-SSOP (0.209, 5.30mm Width) Package

2.7V ~ 5.5V Voltage - Supply

Applications

There are a lot of Integrated Device Technology
ZSC31050FEG1-T Current Sensors applications.

• Motor and load control
• Inverter and H-bridge current measurements
• Power factor correction
• Overcurrent protection
• DC and AC power monitoring
• Closed-L oop DC- and AC-Current Sensor Modules
• Leakage Current Sensors
• Industrial Monitoring and Control Systems
• Overcurrent Detection
• Frequency, Voltage, and Solar Inverters