IDT 8N4Q001KG-0140CDI8

时钟振荡器133.333333MHz，140MHz，146.666666MHz，153.333333MHz3.135V ~ 3.465V-40°C ~ 85°C10-CLCC表面贴装型

Overview

The 8N4Q001KG-0018CDI8 is a Quad-Frequency Programmable Clock Oscillator with very flexible frequency programming capabilities. The device uses IDT's fourth generation FemtoClock® NG technology for an optimum high clock frequency and low phase noise performance. The device accepts 2.5V or 3.3V supply and is packaged in a small, lead-free (RoHS 6) 10-lead ceramic 5mm x 7mm x 1.55mm package. Besides the four default power-up frequencies set by the FSEL0 and FSEL1 pins, the 8N4Q001KG-0018CDI8 can be programmed via the I2C interface to output clock frequencies between 15.476MHz to 866.67MHz and from 975MHz to 1,300MHz to a very high degree of precision with a frequency step size of 435.9Hz ÷ N (N is the PLL output divider). Since the FSEL0 and FSEL1 pins are mapped to four independent PLL divider registers (P, MINT, MFRAC and N), reprogramming those registers to other frequencies under control of FSEL0 and FSEL1 is supported. The extended temperature range supports wireless infrastructure, telecommunication and networking end equipment requirements.

Features

FemtoClock® NG Series
Operate frequency at 133.333333MHz 140MHz 146.666666MHz 153.333333MHz
Package / Case: Tape & Reel (TR)
Mounting Type:Surface Mount
Current - Supply：160mA

3.135V ~ 3.465V Voltage - Supply

Applications

There are a lot of Renesas Electronics America Inc.
8N4Q001KG-0140CDI8 Programmable Timers & Oscillators applications.

• Consumer Electronics
• Remote Sensors
• White Goods
• Electric Vehicles
• Always On Systems
• Clutch Actuator circuit
• Car Door Handle circuit
• Smart Key
• Remote current sensor
• Intruder Detection