Freescale MC9S08QE4CTG

S0820MHz4KB（4K x 8）

Overview

The MC9S08QE4CLC is IC MCU 8BIT 4KB FLASH 32LQFP, that includes S08 Series, they are designed to operate with a MCU Product, Packaging is shown on datasheet note for use in a Tray Alternate Packaging, that offers Unit Weight features such as 0.006653 oz, Mounting Style is designed to work in SMD/SMT, as well as the 32-LQFP Package Case, it has an Operating Temperature range of -40°C ~ 85°C (TA). In addition, the Supplier Device Package is 32-LQFP (7x7), the device is offered in 26 Number of I O, the device has a 20MHz of Speed, and Core Processor is S08, and the RAM Size is 256 x 8, and Program Memory Type is FLASH, and the Peripherals is LVD, PWM, WDT, and Connectivity is I2C, LIN, SCI, SPI, and the Voltage Supply Vcc Vdd is 1.8 V ~ 3.6 V, and Core Size is 8-Bit, and the Program Memory Size is 4KB (4K x 8), and Data Converters is A/D 10x12b, and the Oscillator Type is Internal, it has an Maximum Operating Temperature range of + 85 C, it has an Minimum Operating Temperature range of - 40 C, and Operating Supply Voltage is 1.8 V to 3.6 V, and the Interface Type is I2C SCI SPI, and Core is S08, and the Processor Series is MC9S08, and Data Bus Width is 8 bit, and the Supply Voltage Max is 3.6 V, and Supply Voltage Min is 1.8 V, and the Maximum Clock Frequency is 20 MHz, and Number of ADC Channels is 10, and the Number of I Os is 26 I/O, and Data RAM Size is 256 B, and the Number of Timers Counters is 2 Timer, and ADC Resolution is 12 bit.

The MC9S08QE4CLCR is IC MCU 8BIT 4KB FLASH 32LQFP, that includes I2C, LIN, SCI, SPI Connectivity, they are designed to operate with a S08 Core Processor, Core Size is shown on datasheet note for use in a 8-Bit, that offers Data Converters features such as A/D 10x12b, Number of I O is designed to work in 26, it has an Operating Temperature range of -40°C ~ 85°C (TA), the device can also be used as Internal Oscillator Type. In addition, the Package Case is 32-LQFP, the device is offered in Tape & Reel (TR) Alternate Packaging Packaging, the device has a LVD, PWM, WDT of Peripherals, and Program Memory Size is 4KB (4K x 8), and the Program Memory Type is FLASH, and RAM Size is 256 x 8, and the Series is S08, and Speed is 20MHz, and the Supplier Device Package is 32-LQFP (7x7), and Voltage Supply Vcc Vdd is 1.8 V ~ 3.6 V.

Features

• Peripherals

– ADC — 10-channel, 12-bit resolution; 2.5μs conversion time; automatic compare function; 1.7 mV/°C temperature sensor; internal bandgap reference channel; operation in stop3; fully functional from 3.6 V to 1.8 V

– ACMPx — Two analog comparators with selectable interrupt on rising, falling, or either edge of comparator output; compare option to fixed internal bandgap reference voltage; outputs can be optionally routed to TPM module; operation in stop3

– SCI — Full-duplex non-return to zero (NRZ); LIN master extended break generation; LIN slave extended break detection; wake-up on active edge

– SPI — Full-duplex or single-wire bidirectional; double-buffered transmit and receive; master or slave mode; MSB-first or LSB-first shifting

– IIC — Up to 100 kbps with maximum bus loading; multi-master operation; programmable slave address; interrupt driven byte-by-byte data transfer; supporting broadcast mode and 10-bit addressing

– TPMx — Two 3-channel (TPM1 and TPM2); selectable input capture, output compare, or buffered edge- or center-aligned PWM on each channel

– RTC — (Real-time counter) 8-bit modulus counter with binary or decimal based prescaler; external clock source for precise time base, time-of-day, calendar or task scheduling functions; free running on-chip low power oscillator (1 kHz) for cyclic wakeup without external components; runs in all MCU modes

• Input/Output

– 26 GPIOs, one output-only pin and one input-only pin

– Eight KBI interrupts with selectable polarity

– Hysteresis and configurable pullup device on all input pins; configurable slew rate and drive strength on all output pins.

• Package Options

– 32-pin LQFP, 32-pin QFN, 28-pin SOIC, 20-pin SOIC, 16-pin PDIP, 16-pin TSSOP

• 8-Bit HCS08 Central Processor Unit (CPU)

– Up to 20 MHz CPU at 3.6 V to 1.8 V across temperature range of –40 °C to 85 °C

– HC08 instruction set with added BGND instruction

– Support for up to 32 interrupt/reset sources

• On-Chip Memory

– Flash read/program/erase over full operating voltage and temperature

– Random-access memory (RAM)

– Security circuitry to prevent unauthorized access to RAM and flash contents

• Power-Saving Modes

– Two low power stop modes

– Reduced power wait mode

– Low power run and wait modes allow peripherals to run while voltage regulator is in standby

– Peripheral clock gating register can disable clocks to unused modules, thereby reducing currents

– Very low power external oscillator that can be used in stop2 or stop3 modes to provide accurate clock source to real time counter

– 6 μs typical wake-up time from stop3 mode

• Clock Source Options

– Oscillator (XOSC) — Loop-control Pierce oscillator; crystal or ceramic resonator range of 31.25 kHz to 38.4 kHz or 1 MHz to 16 MHz

– Internal Clock Source (ICS) — Internal clock source module containing a frequency-locked-loop (FLL) controlled by internal or external reference; precision trimming of internal reference allows 0.2% resolution and 2% deviation over temperature and voltage; supporting bus frequencies from 1 MHz to 10 MHz

• System Protection

– Watchdog computer operating properly (COP) reset with option to run from dedicated 1 kHz internal clock source or bus clock

– Low-voltage warning with interrupt

– Low-voltage detection with reset or interrupt

– Illegal opcode detection with reset

– Illegal address detection with reset

– Flash block protection

• Development Support

– Single-wire background debug interface

– Breakpoint capability to allow single breakpoint setting during in-circuit debugging (plus two more breakpoints in on-chip debug module)

– On-chip in-circuit emulator (ICE) debug module containing two comparators and nine trigger modes; eight deep FIFO for storing change-of-flow addresses and event-only data; debug module supports both tag and force breakpoints

Applications

• Industrial

• Air Conditioning (AC)

• Electricity Grid and Distribution

• Gas Meter

• Heart Monitors

• Heat Metering

• Industrial HMI

• Smart Power Socket and Light Switch

• Vital Signs Monitors

• Water Meter