Atmel ATMEGA32L-8PI

AVR8MHz32KB（16K x 16）

Overview

Overview The ATmega32 is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega32 achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed.

• High-performance, Low-power AVR® 8-bit Microcontroller• Advanced RISC Architecture – 131 Powerful Instructions – Most Single-clock Cycle Execution – 32 x 8 General Purpose Working Registers – Fully Static Operation – Up to 16 MIPS Throughput at 16 MHz – On-chip 2-cycle Multiplier• Nonvolatile Program and Data Memories – 32K Bytes of In-System Self-Programmable Flash Endurance: 10,000 Write/Erase Cycles – Optional Boot Code Section with Independent Lock Bits In-System Programming by On-chip Boot Program True Read-While-Write Operation – 1024 Bytes EEPROM Endurance: 100,000 Write/Erase Cycles – 2K Byte Internal SRAM – Programming Lock for Software Security• JTAG (IEEE std. 1149.1 Compliant) Interface – Boundary-scan Capabilities According to the JTAG Standard – Extensive On-chip Debug Support – Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface• Peripheral – Two 8-bit Timer/Counters with Separate Prescalers and Compare Modes – One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode – Real Time Counter with Separate Oscillator – Four PWM Channels – 8-channel, 10-bit ADC 8 Single-ended Channels 7 Differential Channels in TQFP Package Only 2 Differential Channels with Programmable Gain at 1x, 10x, or 200x – Byte-oriented Two-wire Serial Interface – Programmable Serial USART – Master/Slave SPI Serial Interface – Programmable Watchdog Timer with Separate On-chip Oscillator – On-chip Analog Comparator• Special Microcontroller – Power-on Reset and Programmable Brown-out Detection – Internal Calibrated RC Oscillator – External and Internal Interrupt Sources – Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby and Extended Standby• I/O and Packages – 32 Programmable I/O Lines – 40-pin PDIP, 44-lead TQFP, and 44-pad QFN/MLF• Operating Voltages– 2.7 - 5.5V for ATmega32L– 4.5 - 5.5V for ATmega32• Speed Grades– 0 - 8 MHz for ATmega32L– 0 - 16 MHz for ATmega32• Power Consumption at 1 MHz, 3V, 25°C for ATmega32L– Active: 1.1 mA– Idle Mode: 0.35 mA– Power-down Mode: < 1 µA

Features

AVR® ATmega Series
40-DIP (0.600, 15.24mm) package
Mounting type of Through Hole

Through Hole Mounting Type

Applications

There are a lot of Microchip Technology
ATMEGA32L-8PI Microcontroller applications.

• Toys
• Robots
• Radio
• Television
• Heater/Fan
• Calculator
• Kindle
• Christmas lights
• 3D printers
• Washing machine