ADI LTC4413EDD#TRPBF

源极选择器开关P 通道2.6A

Overview

The LTC4413EDD contains two monolithic ideal diodes, each capable of supplying up to 2.6A from input voltages between 2.5V and 5.5V. Each ideal diode uses a 100mΩ P-channel MOSFET that independently connects INA to OUTA and INB to OUTB. During normal forward operation the voltage drop across each of these diodes is regulated to as low as 28mV. Quiescent current is less than 40μA for diode currents up to 1A. If either of the output voltages exceeds its respective input voltages, that MOSFET is turned off and less than 1μA of reverse current will flow from OUT to IN. Maximum forward current in each MOSFET is limited to a constant 2.6A and internal thermal limiting circuits protect the part during fault conditions. Two active-high control pins independently turn off the two ideal diodes contained within the LTC4413, controlling the operation mode as described by Table 1. When the selected channel is reverse biased, or the LTC4413EDD is put into low power standby, a status signal indicates this condition with a low voltage. A 9μA open-drain STAT pin is used to indicate conduction status. When terminated to a positive supply through a 470k resistor, the STAT pin can be used to indicate that the selected diode is conducting with a high voltage. This signal can also be used to drive an auxiliary P-channel MOSFET power switch to control a third alternate power source when the LTC4413EDD is not conducting forward current. The LTC4413EDD is housed in a 10-lead DFN package.

Features

Tape & Reel (TR) Package
in a 10-WFDFN Exposed Pad case
FET Type: P-Channel
10 terminations
Peak Reflow Temperature (Cel) : 260
2 outputs

Surface Mount Mounting Type

Applications

There are a lot of Linear Technology/Analog Devices
LTC4413EDD#TRPBF Ideal Diode controller applications.

• Modems
• Cell phones
• Digital Radios
• MP3 Players
• Active OR-ing of Redundant (N+1) Power Supplies
• Automotive battery protection
• ADAS domain controller
• Camera ECU
• Head Unit
• USB HUBs