ADI LTC3882IUJ-1#PBF

降压降压3V ~ 13.8V

Overview

The LTC�3882 is a dual, PolyPhase DC/DC synchronous step-down switching regulator controller with PMBus compliant serial interface. It uses a constant frequency, leading-edge modulation, voltage mode architecture for excellent transient response and output regulation. Each PWM channel can produce output voltages from 0.5V to 5.25V using a wide range of 3.3V compatible power stages, including power blocks, DrMOS or discrete FET drivers. Up to four LTC3882s can operate in parallel for 2-, 3-, 4-, 6- or 8-phase operation. LTC3882IUJ system configuration and monitoring is supported by the LTpowerPlay� software tool. The device�s serial interface can be used to read back input voltage, output voltage and current, temperature and fault status. A wide range of operating parameters can be set via the digital interface or stored in internal EEPROM for use at power up. Switching frequency and phase, output voltage and device address can also be programmed using external configuration resistors.

Features

PolyPhase® Series
PWM Signal Outputs
Switching Frequency: 500kHz
Enable, Frequency Control, Phase Control, Power Good
Max Duty Cycle: 87.5 %

Surface Mount Mounting Type

Applications

There are a lot of Linear Technology/Analog Devices
LTC3882IUJ-1#PBF DC to DC converter applications.

• Servo drive system
• Digital display device
• Linear guide
• Ball screw pair
• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors