ADI LTC3446IDE#PBF

降压同步（1），线性（LDO）（2）3可调至 0.8V，1A0.9V ~ 5.5V

Overview

The LTC3446IDE combines a synchronous buck DC/DC converter with two very low dropout (VLDO) linear regulators to provide up to three stepped-down output voltages from a single input voltage. The input voltage range is ideally suited for Li-Ion battery-powered applications, as well as powering low voltage logic from 5V or 3.3V rails. The output voltage range extends down to 0.4V for the VLDO regulators and 0.8V for the buck.

The buck converter switches at 2.25MHz, allowing the use of small surface mount inductors and capacitors. Constant frequency current mode operation produces controlled output spectrum and fast transient response. A mode-select pin allows automatic Burst Mode operation to be enabled for higher efficiency at light load, or disabled for lower noise operation down to very light loads. The two VLDO regulators are stable with ceramic output capacitors as small as 1µF.

Features

Tube Package
3 outputs
Operating Temperature: -40°C~125°C
Peak Reflow Temperature: 260

Surface Mount Mounting Type

Applications

There are a lot of Linear Technology/Analog Devices
LTC3446IDE#PBF Linear Regulator Controllers applications.

• High-current, current-limited switch
• Dual/Triple Power Supplies
• Desknotes and Notebooks
• Graphic Cards
• Ultra-Low-Dropout
• Voltage Regulators
• Low-Voltage DSP Power Supplies
• Microcontroller Power Supplies
• Motherboards
• Battery Operating Equipment