ADI LT3950EMSE#TRPBF

DC DC 稳压器3V60V1.5A

Overview

The LT3972IMSE/EMSE/HMSE is an adjustable frequency (200kHz to 2.4MHz) monolithic buck switching regulator that accepts input voltages up to 33V (62V Maximum). A high efficiency 95mΩ switch is included on the die along with a boost Schottky diode and the necessary oscillator, control, and logic circuitry. Current mode topology is used for fast transient response and good loop stability. Low ripple Burst Mode operation maintains high efficiency at low output currents while keeping output ripple below 15mV in a typical application. In addition, the LT3972IMSE/EMSE/HMSE can further enhance low output current efficiency by drawing bias current from the output when VOUT is above 3V Shutdown reduces input supply current to less than 1μA while a resistor and capacitor on the RUN/SS pin provide a controlled output voltage ramp (soft-start). A power good flag signals when VOUT reaches 91% of the programmed output voltage. The LT3972IMSE/EMSE/HMSE is available in 10-Pin MSOP and 3mm × 3mm DFN packages with exposed pads for low thermal resistance.

Features

Tape & Reel (TR) Package
DC DC Regulator Type
Yes Internal Switch(s)
1 Number of Outputs
3V Voltage - Supply (Min)
60V Voltage - Supply (Max)
1.2V ~ 60V Voltage - Output
1.5A Current - Output / Channel
300kHz ~ 2MHz Frequency
PWM Dimming
Automotive, Backlight Applications
Surface Mount Mounting Type