ADI ADG728BRUZ

8：114.5 欧姆2.7V ~ 5.5V

Overview

The ADG728BRUZ is a single-pole single-throw (SPST) 8-channel CMOS Analog Matrix Switch with a serially controlled 2-wire interface. On resistance is closely matched between switches and very flat over the full signal range. These parts can operate equally well as either multiplexers, de-multiplexers or switch arrays and the input signal range extends to the supplies. It utilizes a 2-wire serial interface that is compatible with the I²C interface standard. Have two external address pins (A0 and A1). This allows the 2 LSBs of the 7-bit slave address to be set by the user. Four of each of the devices can be connected to the one bus. The ADG728BRUZ also has a RESET pin that should be tied high if not in use. Each channel is controlled by one bit of a 8-bit word. This means that these devices may be used in a number of different configurations; all, any, or none of the channels may be on at any one time.

Features

Tube Package
8 Channels
10μA Supply Current
Bandwidth: 65MHz
Drain-to-Source resistance: 2.5Ohm
8-Bit

Surface Mount Mounting Type

Applications

There are a lot of Analog Devices Inc.
ADG728BRUZ Analog Switches & Multiplexers ICs applications.

• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement