ADI ADG439FBR

SP4T4：12270 欧姆（标准）15V

Overview

The ADG438F and ADG439FBR are CMOS analog multiplexers, with the ADG438F comprising eight single channels and the ADG439FBR comprising four differential channels. These multiplexers provide fault protection. Using a series n-channel, p-channel, and n-channel MOSFET structure, both device and signal source protection is provided in the event of an overvoltage or power loss. The multiplexer can withstand continuous overvoltage inputs from −40 V to +55 V. During fault conditions with power supplies off, the multiplexer input (or output) appears as an open circuit and only a few nanoamperes of leakage current flows. This protects not only the multiplexer and the circuitry driven by the multiplexer, but also protects the sensors or signal sources which drive the multiplexer.

The ADG438F switches one of eight inputs to a common output as determined by the 3-bit binary address lines, A0, A1, and A2. The ADG439FBR switches one of four differential inputs to a common differential output as determined by the 2-bit binary address lines, A0 and A1. An EN input on each device is used to enable or disable the device. When disabled, all channels are switched off.

Features

Tube Package
4 Channels
Switch Circuit: SP4T
Additional Features: FAULT PROTECTED; OVERVOLTAGE PROTECTION

Surface Mount Mounting Type

Applications

There are a lot of Analog Devices Inc.
ADG439FBR Analog Switches & Multiplexers ICs applications.

• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement