ADI AD8639ARZ

断路器（零漂移）满摆幅1.5 MHz

Overview

The AD8639ARZ is a Dual Bandwidth Auto-Zero Operational Amplifier features rail-to-rail output swing and low noise. This amplifier has very low offset, drift and bias current. Operation is fully specified from 5 to 16V single supply. It provides benefits previously found only in expensive auto-zeroing or chopper-stabilized amplifier. No external capacitors are required. In addition, the AD8639ARZ greatly reduces the digital switching noise found in most chopper-stabilized amplifier. With an offset voltage of only 3µV, drift of less than 0.001µV/°C and noise of only 1.2µV p-p (0 to 10Hz), the op amp is suited for applications where error sources cannot be tolerated. Position and pressure sensors, medical equipment and strain gage amplifiers benefit greatly from nearly zero drift over their operating temperature range. Many systems can take advantage of the rail-to-rail input and output swings provided by the AD8639ARZ to reduce input biasing complexity and maximize SNR.

Features

Tube Package
8 Pins
supply voltage of 5V
136dB voltage gain
Output Type: Rail-to-Rail

Surface Mount Mounting Type

Applications

There are a lot of Analog Devices Inc.
AD8639ARZ Instrumentational OP Amps applications.

• Inverse/same-phase proportional circuit
• Addition operation circuits
• Subtraction operation circuits
• single/dual op amp sum and difference circuits
• Integrator circuits
• Differentiator circuits
• Logarithmic operation circuits
• Exponential operation circuits
• Multiplication circuits
• Division circuits