ADI AD597AR

热电偶调节器-200°C ~ 1250°C-55°C ~ 125°C

Overview

The AD596/AD597AR is a monolithic temperature setpoint controller which has been optimized for use at elevated temperatures such as those found in oven control applications. The device cold junction compensates and amplifies a type J or K thermocouple input to derive an internal signal proportional to temperature. The internal signal is then compared with an externally applied setpoint voltage to yield a low impedance switched output voltage. Dead-Band or switching hysteresis can be programmed using a single external resistor. Alternately, the AD596/ AD597AR can be configured to provide a voltage output (10 mV/°C) directly from a type J or K thermocouple signal. It can also be used as a stand-alone voltage output temperature sensor.

The AD596/AD597AR has a calibration accuracy of ±4°C at an ambient temperature of 60°C and an ambient temperature stability specification of 0.05°C/°C from +25°C to +100°C. If higher accuracy, or a lower ambient operating temperature is required, either the AD594 (J thermocouple) or AD595 (K thermocouple) should be considered.

Features

Tube Package
Available in the 8-SOIC (0.154, 3.90mm Width) package
ANALOG CIRCUIT as analog IC type

Surface Mount Mounting Type

Applications

There are a lot of Rochester Electronics, LLC
AD597AR applications of thermal management.

• Data Storage
• Data Communications Equipment
• Instrumentation
• Workstations
• Servers
• Networking
• Telecommunications
• Desktop Computers
• Notebook Computers
• Projectors